• replied to the topic in the forum

    LaserFish only happens when talking infront of others cause you are in effect performing in front of them.

    Maybe getting around the idea of `preforming` will help.

    I have a similar problem when signing […]

  • replied to the topic in the forum

    Congrats jambap , good to see someone else is getting results with laser and minox.

    I`m a long time minox user , dropped the minox when started lasering and shed bigtime , back on laser with minox and got my […]

  • replied to the topic in the forum

    Bump for OMG

    how long did use the lasers for on the transplant area ?

  • replied to the topic in the forum

    Cue Lava , post a picture of the type of cuff , and where get I get them from.

    I have not seen any that go round the head.

  • replied to the topic in the forum

    James Peters said “google joules laser hair removal begins at” it is above 10 joules.

    For hair removal it is delivered in a flash, like a pulse of 10 or more joules, which is very different than getting 10 […]

  • started the topic in the forum

    I wanted to bring this up, posted on this site.

    Treatment on an open wound, so there are more joules being absorbed , where is the laser bio inhibition, in this case?

    All those joules did very well for the wound.

    I`m considering increasing laser time , may get better results.

  • replied to the topic in the forum

    crzyakta

    thanks for this , I did not know you can add a resistor with the sense wire.

  • replied to the topic in the forum

    really don`t think an upgraded the circuit board is the complete solution.

    It comes down to the quality of the components used on the board.

  • replied to the topic in the forum

    FYI swansons has Magnesium oil as well.

  • replied to the topic in the forum

    1 and 2 .. Used minox 5% for about 12 years, the generic stuff. Worked really well for me , losing hair was not an issue anymore for many years.

    3. Twice a day, time is not that important , sometimes I […]

  • replied to the topic in the forum

    I use one of these.

    120mW Calibrated Laser Power Meter Sensor Module
    <br […]

  • replied to the topic in the forum

    Hey raptor.

    If you are not using Fin or minox don`t start now , plus its takes time for them to start working. Minox will cause more shedding initially and you may never fully recover.

    I would recommend […]

  • replied to the topic in the forum

    look up … Hemi Sync

    Use it all the time, mostly to get better sleep

  • replied to the topic in the forum

    Joely

    This happened to me a couple of times. One of your lasers is shorted, meaning the red and black wires leading to it are acting as if they are connected together.

    Just cut and remove the wire that […]

  • replied to the topic in the forum

    I came across the zapper on this forum being very skeptical of it I looked online and found it expensive so I eventually made one, cost about $3.00.

    You do need a test meter that can read frequency.

    This is a 15hz zapper and it made me dizzy so I made a 30Khz (30,000HZ) using info…

  • replied to the topic in the forum

    jdp

    another issue is size and weight, if using a lot.

  • replied to the topic in the forum

    gotta make sure you can unscrew the lens part so that can be used diffused.

    These look different from Aixiz ones.

  • replied to the topic in the forum

    OMGmyhair

    I have get my EMU from here, I use is a lot for other reasons and it works.

  • replied to the topic in the forum

    I just got a pair of these on JDP`s recommendation

    and as Cowbell says, You can look directly at 200 plus diodes, […]

  • replied to the topic in the forum

    ExDown thanks for reply,

    How far away from your skin ?

  • Load More